Note: any prices or technical details given on these pages are subject to change without prior notice.all prices shown exclude vat and are subject to availability
DFG 200 SINGLE HEAD GRINDER
- 250mm Single head lightweight floor grinder
- 110v 32amp 2.2kw motor
- Weighs less than 50kg
- Has removable weight 5kg
- Dust free when used with 316 dust control unit
- Adjustable dust skirt fitted
- Can be used with PCD diamond tools for light adhesive removal, or on concrete capable of up to 100m2 per day on 1mm concrete removal.
DAY £81.00 WEEKEND £108.00 WEEKEND £139.00
Wear charge per mm on diamond shoes £55.00 per mm per set of 3
Wear charge per mm on PCD shoe £35.00 per mm per set of 3
Download
PDF file
DFG400 TWIN HEAD LIGHT WEIGHT GRINDER
· 2 x 250 mm heads driven by heavy duty gearboxes
· Dust extraction skirt provides up to 98% when used with 316 dust control unit
· Theoretical work rate up to 200m2 per day on 1 mm non coated power floated concrete
· Uses diamond grinding plates or abrasive blocks
· 110V 32amp or petrol types available
· Weight of only 80 kg
DAY £89.40 WEEKEND £119.20 WEEK £149.00
WEAR CHARGE PER MM PER PLATE £59.00
WITH MINIMUM OF 0.5MM CHARGEABLE
ABRASIVE BLOCKS £5.95 EACH - SIX NEEDED FOR SET
WIRE BRUSH £3.95 EACH - SIX NEEDED FOR SET
DFG 250 3PHASE OR PETROL HEAVY WEIGHT GRINDER
- Single head 250 mm suitable for heavy removal of coatings and adhesives
- Dust extraction available via dust port
- Range of diamond plates available for varient surfaces - hard/soft bonded
- Approx rate of work is 250m2 per day on 3mm of concrete
DFG 250 PETROL DAY £99.00 WEEKEND £132.00 WEEK £165.00
DFG 250 3 PHASE DAY £117.00 WEEKEND £156.00 WEEK £195.00
C/w ext lead 20m
Suitable 32amp 5pin 3phase outlet required from site or generator
Wear charge on diamond plates per mm £80.00
(minimum of 0.5mm).
